Chemical Library

Multiple chemicals are used in WAVE to adjust pH, coagulate solids, clean UF modules, prevent scaling, regenerate ion exchange resins etc. In WAVE, these chemicals can be common substances (e.g. NaOH, HCl) at various concentrations or user defined chemicals. These chemicals can be defined as shown below:

1. Click on ‘User Settings’ in the top ribbon

   

   Figure 1: Selection of User Settings to specify Chemicals

2. Click on ‘Chemical Library’

   

   Figure 2: Selection of the Chemical Library to specify Chemicals

3. Select which chemicals would appear in dropdown boxes and which chemicals are to be included in cost calculations

   

   Figure 3: Specification of Chemicals